Reference Guide

Table Of Contents
Table 23. Memory (continued)
Property Description
4 = Shut Down
5 = No Change
6 = OfflineIndicates that the element has been
requested to transition to the Enabled but Offline
EnabledState.
7 = Test
8 = Deferred
9 = Quiesce
10 = RebootRefers to doing a Shut Down and then
moving to an Enabled state.
11 = Reset - Indicates that the element is first Disabled
and then Enabled.
12 = Not Applicable
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No ChangeIndicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not ApplicableIndicates the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
Volatile
Volatile is a property that indicates whether this memory is
volatile or not.
DCIM_PCIDevice
Table 24. PCIDevice
Property Description
BusNumber
The bus number where this PCI device resides.
CreationClassName
Indicates the name of the class or the subclass used in the
creation of an instance. When used with the other key
properties of this class, this property allows all instances of
this class and its subclasses to be uniquely identified.
Dell Command | Monitor 10.4 classes and properties 91