Reference Guide

Table 22. USBPort (continued)
Property Description
element may not be operating at optimal performance or it
may be reporting recoverable errors.
● 15 = Minor failure—All functionality is available but some
may be degraded.
● 20 = Major failure—The element is failing. It is possible
that some or all of the functionality of this component is
degraded or not working.
● 25 = Critical failure—The element is non-functional and
recovery may not be possible.
● 30 = Non-recoverable error—The element has completely
failed, and recovery is not possible. All functionality
provided by this element has been lost.
● .. = DMTF Reserved
IdentifyingDescriptions
An array of free-form strings providing explanations and
details behind the entries in the OtherIdentifyingInfo array.
Note that each entry of this array is related to the entry in
OtherIdentifyingInfo that is located at the same index.
RequestedState
An integer enumeration that indicates the last requested or
desired state for the element, irrespective of the mechanism
through which it was requested. The actual state of the
element is represented by EnabledState. This property is
provided to compare the last requested and current enabled
or disabled states. Note that when EnabledState is set to 5
(Not Applicable), then this property has no meaning. Refer
to the EnabledState property description for explanations of
the values in the RequestedState enumeration. Unknown (0)
indicates the last requested state for the element is unknown.
NOTE: The value No Change (5) has been deprecated
instead of indicating the last requested state is Unknown
(0). If the last requested or desired state is unknown,
RequestedState should have the value Unknown (0), but
may have the value No Change (5).
There are two new values in RequestedState that build on the
statuses of EnabledState. These are Reboot (10) and Reset
(11).
Shut Down requests an orderly transition to the Disabled
state, and may involve removing power, to completely erase
any existing state. The Disabled state requests an immediate
disabling of the element, such that it will not execute or
accept any commands or processing requests. This property is
set as the result of a method invocation (such as Start or
StopService on CIM_Service), or can be overridden and
defined as WRITEable in a subclass. The method approach is
considered superior to a WRITEable property, because it
allows an explicit invocation of the operation and the return of
a result code. If knowledge of the last RequestedState is not
supported for the EnabledLogicalElement, the property is
NULL or has the value 12 Not Applicable.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change
84
Dell Command | Monitor 10.4 classes and properties