Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Disabled
Enabled
Wireless Switch Change
Permits or Denies Wireless Switch changes. If the
administrator password is not set, this setting will have no
effect.
Possible values are:
Deny
Permit
Windows
Wireless Switch Wireless LAN Control
Enables or Disables wireless switch wireless LAN control.
This switch has no effect on the state of the wireless LAN
radio for systems with a physical wireless on/off switch.
Possible values are:
Disabled
Enabled
Windows, Linux
Wireless Switch WLAN-WIGIG
Control
Enables or Disables the effect of physical wireless switch
on wireless LAN and WiGig radio.
Possible values are:
DisabledThe wireless physical switch does not affect
the wireless LAN and WiGig radios.
EnabledIf the wireless physical switch is on, turns the
wireless LAN on and WiGig radio on. If the wireless
switch is off, turns the wireless LAN on and WiGig radio
off.
Windows, Linux
Wireless UWB
Enabled/Disabled UWB card.
Possible values are:
Disabled
Enabled
Windows
WLAN Region Code
Sets the WLAN code for specific region.
Possible values are:
0 = Rest of the WorldSets the WLAN region code for
the rest of the world. This option is selected by default.
1 = North America (FCC)Sets the WLAN region code
for Canada, and the United States.
2 = EuropeSets the WLAN region code for Australia,
Belgium, Czech Republic, Denmark, Finland, France,
Germany, Ireland, Italy, Luxembourg, Netherlands,
Norway, Poland, Portugal, Slovakia, Spain, Sweden,
Switzerland, Turkey, and United Kingdom.
3 = JapanSets the WLAN region code for Japan only.
4 = AustraliaSets the WLAN region code for Australia,
New Zealand, Saudi Arabia, South Africa, UAE, and
Vietnam.
5 = China South AsiaSets the WLAN region code for
China, and India.
6 = TaiwanSets the WLAN region code for Colombia,
Peru, and Taiwan.
7 = IndonesiaSets the WLAN region code for
Indonesia only.
Windows, Linux
322 BIOS settings supported in Dell Command | Monitor 10.4