Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Possible values are:
● Disabled
● Enabled
Wake On LAN
Defines the wake On LAN feature. This property defines
whether Wakeup On LAN is Disabled, Enabled for on-board
NIC only or Enabled for add-in NIC only, if Enabled with
boot to NIC option is selected, the system boots from the
NIC boot-ROM upon a remote wakeup.
Possible values are:
● Disabled
● Enabled_AIC
● Enabled_OnBoard
● Enabled All
● Lan or WLAN
● WLAN only
● LAN with PXE boot
Windows
Wake on 2nd LAN (RJ-45/SFP)
Defines the wake on 2nd LAN feature.
Possible values are: 1, 2, 3
● Disabled
● LanOnly
● LanWithPxeBoot
Windows
Wake-On-LAN Boot Override
If Enabled then when the system powers on due to a Wake-
on-LAN event, the NIC boot-ROM is automatically given
the highest boot priority, pre-pending the PXE boot-ROM
to the system’s current boot sequence. If the system
powers on due to some other event, this selection does not
influence the boot sequence. If Disabled then the boot
override feature is Disabled and the system boot sequence
is in effect for all types of system power on.
Possible values are:
● Disabled
● Enabled
Windows
Warnings And Errors
During post the system continues to boot or pauses when
warnings or errors are detected. This feature can be used
for the remotely managed systems that do not have a
keyboard or a consoles available for use.
Possible values are:
● 1 = Disabled—System pauses for the user to respond
when warnings or errors are detected.
● 2 = Continue on Warnings—System continues to boot
when warnings are detected, but pauses for the user to
respond when errors are detected.
● 3 = Continue on Warnings and Errors—System
continues to boot when warnings or errors are detected.
Windows, Linux
Watchdog Timer
The system will/will not reboot/reset if the watchdog timer
expires
Possible values are:
Windows, Linux
320 BIOS settings supported in Dell Command | Monitor 10.4