Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Possible values are:
0 = SHA-1
1 = SHA-256
2 = SHA-384
3 = SHA-512
NOTE: This value cannot be changed if the TPM is
already owned.
Trusted Execution
New processor execution mode and BIOS hooks to Enabled
a protected execution environment and main memory
protection.
Possible values are:
On
Off
Windows, Linux
Trusted Platform Module
Enables or Disables the Trusted Platform Module (TPM).
Possible values are:
Enabled
Disabled
Windows, Linux
Trusted Platform Module Activation
This property is used to activate the TPM if it is
deactivated, unowned and a BIOS Admin password is set
and has been verified; otherwise this property reports the
status of the TPM Activation BIOS option.
Possible values are:
Deactivate
Activate
Windows, Linux
TPM PPI ACPI Support
Enables or Disables the TPM ACPI physical presence
commands.
Possible values are:
Enabled
Disabled
Windows, Linux
TPM PPI Provision Override
Enables or Disables the physical presence for the ACPI TPM
PPI provision operations.
Possible values are:
Enabled
Disabled
Windows, Linux
TPM PPI Deprovision Override
Enables or Disables the physical presence for the ACPI TPM
PPI deprovision operations.
Possible values are:
Enabled
Disabled
Windows, Linux
Type-C Battery Overload Protection
Configures the maximum power for type-C connector.
Possible values are:
07.5 Watts
115 Watts
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.4 313