Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Processor CMP
Rolls the number of Enabled cores in each processor. By
default, the maximum number of cores per processor will be
Enabled.
Possible values are:
All
1
2
4
6
8
10
12
14
16
Windows, Linux
Processor Core Count
Enables the number of cores in each processor.
Possible values are:
0Enables all cores.
1NEnables the specified number of cores.
Windows, Linux
Processor Execute Disabled
Enables or Disables the No Execute (NX) flag.
Possible values are:
Disabled
Enabled
Windows, Linux
Processor HT Assist
Allows user to Disabled the Probe Filter chipset option from
BIOS setup. There are some applications that may have
lower performance with the chipset feature Enabled.
Possible values are:
Disabled
Enabled
Windows, Linux
Processor Virtualization Technology
Enables or Disables processor Virtualization.
Possible values are:
Disabled
Enabled
Windows, Linux
Processor C State Control
Enables or Disabled the C States Control.
Possible values are:
Enabled
Disabled
Windows, Linux
Processor Core Based Turbo Mode
Enables or Disables Single Core Turbo Mode.
Possible values are:
Disabled
Enabled
Windows, Linux
Processor Logical Processor
(HyperThreading)
Enables or Disables hyperthreading on next boot. On some
Dell platforms, this property will show Enabled or Disabled
despite the platform not supporting hyperthreading. The
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.4 299