Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Optimus
Enables or Disables the Optimus.
Possible values are:
Enabled
Disabled
Windows
Optional Boot Sequence
Allows or prevents the installation of Windows operating
system on client systems with more than one operating
system volume.
Possible values are:
Enabled
Disabled
Windows
OpRomUIProtection
Prompts you to enter the administrator password to enter
the OptionROM user interface if the password has been
set.
Possible values are:
Enabled
Disabled
Windows, Linux
OROM Keyboard Access
Sets an option to enter the Option ROM Configuration
screens using hotkeys during boot.
Possible values are:
Enabled
Disabled
Onetime EnabledAllows configuring the access to
Option ROM using hotkeys during system startup.
Windows, Linux
OS Install Mode
Enables or Disables OS Install Mode (Limit System Memory
feature).
Possible values are:
Enabled
Disabled
Windows
Parallel Mode
This property defines the parallel port mode.
Possible values are:
AT
PS2
ECP
EPP
ECP DMA1
ECP DMA3
Windows, Linux
Parallel Port
This property defines the parallel port configuration.
Possible values are:
LPT1
LPT2
LPT3
Windows, Linux
PartComponent
Defines the boot sequence for the next system boot. Boot
Sequence information can be found under the class
DCM_OrderedComponent.
Windows
290 BIOS settings supported in Dell Command | Monitor 10.4