Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Memory Fault Tolerance Time Limit
Configures the time limit value of the memory fault
tolerance. Possible values are: 0 to 36000 in 1/10th of a
second.
Possible values are: 0 to 36000
NOTE: Memory fault tolerance feature is Disabled
when the value is set to 0.
Windows, Linux
Memory Performance Monitor
Enables or Disables the memory performance monitor
feature.
Possible values are:
Disabled
Enabled
Windows, Linux
Memory RSA
Enables or Disables the Reliability Availability Serviceability
(RSA) support on memory modules.
Possible values are:
Disabled
Enabled
Windows, Linux
MEMs Sensors
Enables or Disables the Micro Electro Mechanical Sensors.
Possible values are:
Disabled
Enabled
Windows, Linux
Microcode Update Support
This feature enables or disables the microcode updates
either from the flash update utility or the operating system.
Possible values are:
Disabled
Enabled
Windows, Linux
Microphone
Enabled or Disabled notebook internal or external
microphone.
Possible values are:
Disabled
Enabled
Windows, Linux
MiniPCI Device
Enables or Disables the internal PCI device.
Possible values are:
Disabled
Enabled
Windows, Linux
Multiple CPU Cores
Enables or Disables Multiple CPU Core support on next
boot. The Disabled state prevents the OS from seeing
additional cores present on a single CPU package.
Possible values are:
Disabled
Enabled
Windows, Linux
MmioAbove4Gb
Enables or Disables the Memory mapped I/O above 4GB
option.
Windows, Linux
286 BIOS settings supported in Dell Command | Monitor 10.4