Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Enabled
Disabled
Ignition On Delay
The delay is displayed in seconds, when the power button
event is passed to the operating system to initiate the
booting.
Possible values are from (021600). By default the value
is 5s.
Windows, Linux
Ignition Off Delay
The delay is displayed in seconds untill the power button
event is passed to the operating system for shutting down
the system.
Possible values are from (021600). By default the value
is 5s.
Windows, Linux
Ignition De-bounce Cycle
De-Bounce Ignition Power Switch cycle time is displayed in
milli seconds.
Possible values are from (505000). By default the value
is 50ms.
Windows, Linux
I/O Module
Enables or Disables the I/O module.
Possible values are:
Disabled
Enabled
Windows, Linux
I/O Module 2
Enables or Disables the I/O module 2.
Possible values are:
Disabled
Enabled
Windows, Linux
I/O Module 3
Enables or Disables the I/O module 3.
Possible values are:
Disabled
Enabled
Windows, Linux
I/O Module 4
Enables or Disables the I/O module 4.
Possible values are:
Disabled
Enabled
Windows, Linux
Intel Smart Connect Technology
Disables or Enables the Intel Smart Connect technology.
Possible values are:
Disabled
Enabled
Windows, Linux
Intel Speed Select Technology
Intel Speed Select Technology allows you to choose up to
two additional base frequency conditions.
Configuration 1: TDP Level 3
Configuration 2: TDP Level 4
Possible values are:
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.4 279