Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Hard Disk Acoustic Mode
Sets the Hard Disk Acoustic Mode.
Possible values are:
Bypass
Quiet
Suggested
Performance
Windows
Hard-Disk Failover
Specifies which devices in the Hard-Disk Drive Sequence
menu are attempted in the boot sequence. When set to
OFF, only the first device in the list is attempted. When set
to ON, all devices are attempted in order, as listed in the
Hard-Disk Drive Sequence.
Possible values are:
Disabled
Enabled
Windows
Hardware Prefetcher
Enables or Disables the CPUs HW prefetcher.
Possible values are:
Disabled
Enabled
Windows, Linux
Hard Drive Free Fall Protection
Enables or Disables hard drive free fall protection.
Possible values are:
Disabled
Enabled
Windows, Linux
Hardware Prefetch Training on
Software Prefetch
Prevents hardware prefetcher from considering software
prefetches when detecting strides for prefetch requests./
Hardware prefetcher considers software prefetches when
detecting strides for prefetch requests.
Possible values are:
Disabled
Enabled
Windows, Linux
HDD Protection
If setting On, the HDD Protection OPROM will be loaded. If
setting Off, the HDD Protection OPROM will be not loaded.
Possible values are:
Off
On
Windows, Linux
HDD0 Fan Enabled
Enables or Disables checking errors on the fan controller
FAN_HDD0. If the fan controller detects a valid fan, it
Enables it automatically.
Possible values are:
Enabled
Disabled
Windows, Linux
HDD1 Fan Enabled
Enables or Disables checking errors on the fan controller
FAN_HDD1. If the fan controller detects a valid fan, it
Enables it automatically.
Possible values are:
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.4 277