Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
6.0
7.0
7.5
8.0
8.5
9.0
9.5
Camera
Enables or Disables the camera.
Possible values are:
Disabled
Enabled
Windows, Linux
CAN Bus
Enables or Disables the Controller Area Network (CAN)
Bus.
Possible values are:
Disabled
Enabled
Windows, Linux
Cellular Radio
Enables or Disables the cellular radio, that is, the WWAN
module.
Possible values are:
Disabled
Enabled
Windows, Linux
Charger
Defines the charger details.
Possible values are:
Disabled
Enabled
Windows
Chassis Intrusion
Enables the system to detect and report the Chassis
Intrusion events to the system display on boot-up.
Possible values are:
Disabled
Enabled
Silent
Windows, Linux
Chassis Intrusion Status
This property shows the status of the system with regards
to Chassis Intrusion (Detected or Not Detected). A value of
Unknown indicates one of two things: either Chassis
Intrusion is not supported by this system, or Chassis
Intrusion event reporting has been Disabled by the user. If
the value is Detected, the user may set it to Not Detected
to Enabled the system to receive the next event and to
stop generating events for now.
Possible values are:
Tripped
Door open
Door closed
Trip reset
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.4 265