Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.4 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Auto Switch Enabled, Disabled
Possible values are: 1,2
Windows, Linux
Auto Wake Period
Defines the time in minutes after which the system should
automatically wake up from Standby, Hibernate, or
Switched off mode.
Possible values are: 0, integers ranging from 1 to 254
NOTE: The system wakes up from Sleep, Hibernate, or
Switched off mode only if the Auto On option is Enabled
for everyday of the week.
Windows, Linux
BIOS Auto Recovery
Enables or Disables the BIOS auto recovery feature.
Possible values are:
EnabledIf BIOS corruption is detected, the system
automatically recovers BIOS without any user
interaction.
DisabledDisables BIOS auto recovery feature.
Windows, Linux
Back Camera
Enables or Disables the rearward facing camera.
Possible values are:
DisabledDisables the rearward facing camera.
EnabledEnables the rearward facing camera.
Windows, Linux
Battery Fuel Gauge
This feature controls the battery fuel gauge.
Possible values are:
DisabledDisabling this feature prevents the battery
fuel gauge from being activated on touch or swipe.
EnabledEnabling this feature allows the battery fuel
gauge to be activated on touch or swipe.
Windows, Linux
Battery Slice Charge Configuration
Configures the battery slice charging
Possible values are:
1Adaptive
2Standard
3- Express
4- PrimAcUse
5- Custom
Windows, Linux
BIOS Connect
Enables or Disables the BIOS Connect feature.
Possible values are:
Enabled
Disabled
Windows, Linux
BIOS Connect Activation
Configures the state of the available BiosConnect boot
paths.
Possible values are:
0DeactivateBIOS setup options are not available
and all BiosConnect boot paths are Disabled.
1Full ActivationBIOS Setup options are Enabled and
all BiosConnect boot paths are Enabled.
Windows, Linux
262 BIOS settings supported in Dell Command | Monitor 10.4