Reference Guide

Table 77. PowerUtilizationManagementCapabilities (continued)
Property Description
● 0 = Unknown
● 2 = CPUPowerMode
● 3 = MemoryPowerMode
● 4 = OtherMemoryPowerMode
● 5 = FanPowerMode
SupportedMethods
Each enumeration corresponds to support for the like-named method of the
MetricService.
Possible values are:
● .. = DMTF Reserved
● 32768 = RequestPowerUtilizationLimit
● 32769 = RequestPowerUtilizationAlgorithm
● 32770 = RequestPowerUtilizationAlgorithmEI
● 32771..65535 = Vendor Specific
SupportedRequestedAlgorithms
Array of power utilization algorithms supported by the
RequestPowerUtilizationAlgorithm and RequestPowerUtilizationAlgorithmEI
methods RequestedAlgorithm parameter of the associated Service.
SupportedUtilizationLimitUnits
Array of programmatic units for power utilization limit supported by the
RequestPowerUtilizationLimit method's UtilizationLimit parameter.
DCIM_EnabledLogicalElementCapabilities
Table 78. EnabledLogicalElementCapabilities
Property Description
ElementName
The user friendly name for this instance of Capabilities. In addition, the user friendly
name can be used as a index property for a search of query.
NOTE: Name does not have to be unique within a namespace.
ElementNameEditSupported
Boolean indicating whether the ElementName can be modified.
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. To ensure uniqueness within the NameSpace, the
value of InstanceID should be constructed using the following preferred algorithm:
<OrgID> : <LocalID>
Where <OrgID> and <LocalID> are separated by a colon (:), and where <OrgID>
must include a copyrighted, trademarked, or otherwise unique name that is owned by
the business entity that is creating or defining the InstanceID or that is a registered
ID assigned to the business entity by a recognized global authority. (This
requirement is similar to the <Schema Name>_<Class Name> structure of Schema
class names.) In addition, to ensure uniqueness, <OrgID> must not contain a colon
(:). When using this algorithm, the first colon to appear in InstanceID must appear
between <OrgID> and <LocalID> . <LocalID> is chosen by the business entity and
should not be reused to identify different underlying (real-world) elements. If the
above preferred algorithm is not used, the defining entity must assure that the
resulting InstanceID is not reused across any InstanceIDs produced by this or other
providers for the NameSpace of this instance. For DMTF-defined instances, the
preferred algorithm must be used with the <OrgID>set to CIM.
RequestedStatesSupported
RequestedStatesSupported indicates the possible states that can be requested
when using the method RequestStateChange on the EnabledLogicalElement.
Possible values are:
216 Dell Command | Monitor 10.4 classes and properties