Reference Guide

Table Of Contents
Table 56. PowerAllocationSettingData (continued)
Property Description
4 = MaxAsConfiguredIndicates that the instance provides information about
the maximum power that may be allocated to or consumed by the
ManagedSystemElement as currently configured while powered on. The actual
power consumed may be less.
5 = MaxIfAllHotPlugIndicates that the instance provides information about the
maximum power allocated or consumed by the ManagedSystemElement if all
components that could be added to the ManagedSystemElement without
requiring a power cycle of the ManagedSystemElement were added to the
ManagedSystemElement.
6 = MaxIfAllColdPlugIndicates that the instance provides information about the
maximum power allocated or consumed by the ManagedSystemElement if all
components that could be added to the ManagedSystemElement, including those
that require a power cycle of the ManagedSystemElement, were added to the
ManagedSystemElement.
7 = AllocatedIndicates that the instance provides information about the
current power allocated to the ManagedSystemElement.
8 = MinWithoutDegradationIndicates that the instance provides information
about the minimum power allocated or consumed by the ManagedSystemElement
without causing performance degradation.
.. = DMTF Reserved
32768..65535 = Vendor Reserved
ResourceType
The type of resource this allocation setting represents.
Possible values are:
1 = Other
2 = Computer System
3 = Processor
4 = Memory
5 = IDE Controller
6 = Parallel SCSI HBA
7 = FC HBA
8 = iSCSI HBA
9 = IB HCA
10 = Ethernet Adapter
11 = Other Network Adapter
12 = I/O Slot
13 = I/O Device
14 = Floppy Drive
15 = CD Drive
16 = DVD drive
17 = Disk Drive
18 = Tape Drive
19 = Storage Extent
20 = Other storage device
21 = Serial port
22 = Parallel port
23 = USB Controller
24 = Graphics controller
25 = IEEE 1394 Controller
26 = Partitionable Unit
27 = Base Partitionable Unit
28 = Power
29 = Cooling Capacity
30 = Ethernet Switch Port
31 = Logical Disk
Dell Command | Monitor 10.4 classes and properties
193