Reference Guide

Table 47. ComputerSystem (continued)
Property Description
● 12 = I/O
● 13 = Web Caching
● 14 = Management—Indicates this instance is dedicated to hosting system
management software.
● 15 = Block Server
● 16 = File Server
● 17 = Mobile User Device
● 18 = Repeater
● 19 = Bridge/Extender
● 20 = Gateway
●
21 = Storage Virtualizer
● 22 = Media Library
● 23 = ExtenderNode
● 24 = NAS Head
● 25 = Self-contained NAS
● 26 = UPS
● 27 = IP Phone
● 28 = Management Controller—Indicates this instance represents specialized
hardware dedicated to systems management (i.e., a Baseboard Management
Controller (BMC) or service processor).
● 29 = Chassis Manager—Indicates this instance represents a system dedicated to
management of a blade chassis and its contained devices. This value would be
used to represent a Shelf Controller. A Chassis Manager is an aggregation point
for management and may rely on subordinate management controllers for the
management of constituent parts.
● 30 = Host-based RAID controller—Indicates this instance represents a RAID
storage controller contained within a host computer.
● 31 = Storage Device Enclosure—Indicates this instance represents an enclosure
that contains storage devices.
● 32 = Desktop
● 33 = Laptop
● 34 = Virtual Tape Library—Is the emulation of a tape library by a Virtual Library
System.
● 35 = Virtual Library System—Uses disk storage to emulate tape libraries.
● 36..32567 = DMTF Reserved
● 32568..65535 = Vendor Reserved
ElementName
A user-friendly name for the object. This property allows each instance to define a
user-friendly name in addition to its key properties, identity data, and description
information.
NOTE: The Name property of ManagedSystemElement is also defined as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that
the same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
Dell Command | Monitor 10.4 classes and properties 171