Reference Guide

Table 45. BIOSService (continued)
Property Description
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 Not Applicable.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates that the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
SetBIOSAttributes (Method)
This method is called to modify a group of BIOSAttribute instances associated with
this BIOSService. The method may return the following errors:
● 0 (Success)—If the method is completed successfully.
● 1 (Failure) — If
○ the possible value is out of range. For example, trying to set value other than
0 to 23 for the attribute Autoon Hour.
○ it is an unsupported BIOS operation. For example, trying to enable TPM when
TPM is disabled.
● 2 (Authentication failure)—If the BIOS password is incorrect.
● 4294967295 (Invalid Possible Value)—If the possible value is invalid; or read-
only.
The method may return an instance of CIM_Error.
RemoteBIOSUpdate (Method)
This method is called to remotely update the BIOS image. It takes the hdr file of the
BIOS image as the only parameter.
DCIM_SoftwareInstallationService
Table 46. SoftwareInstallationService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the creation of an
instance. When used with the other key properties of this class, this property allows
all instances of this class and its subclasses to be uniquely identified.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
● 2 = Enabled
Dell Command | Monitor 10.4 classes and properties 167