Reference Guide

Table Of Contents
Table 36. LCDPanel (continued)
Property Description
8 = DeferredIndicates that the element may be completing commands, but will
queue any new requests.
9 = QuiesceIndicates that the element is enabled but in a restricted mode.
10 = StartingIndicates that the element is in the process of going to an
Enabled state. New requests are queued.
11..32767 = DMTF Reserved
32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
LocalConfigurationEnabled
Indicates if the LCD panel may be used to modify the system configuration. A value
of true indicates system configuration via the LCD panel is enabled. A value of false
indicates system configuration via the LCD panel is disabled.
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No ChangeIndicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not ApplicableIndicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_NetworkPortConfigurationService
Table 37. NetworkPortConfigurationService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the creation of an
instance. When used with the other key properties of this class, this property allows
all instances of this class and its subclasses to be uniquely identified.
ElementName
A user-friendly name for the object. This property allows each instance to define a
user-friendly name in addition to its key properties, identity data, and description
information.
NOTE: The Name property of ManagedSystemElement is also defined as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that
the same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
Dell Command | Monitor 10.4 classes and properties 145