Reference Guide

Table 28. PowerSupply (continued)
Property Description
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates that the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
TypeOfRangeSwitching
Describes the kind of input voltage range switching that is implemented in this
PowerSupply.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Manual
● 4 = Autoswitch
● 5 = Wide Range
● 6 = Not Applicable
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_Battery
Table 29. Battery
Property Description
BatteryStatus
Description of the charge status of the Battery.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Fully Charged
● 4 = Low
● 5 = Critical
● 6 = Charging
● 7 = Charging and High
●
8 = Charging and Low
● 9 = Charging and Critical
● 10 = Undefined
● 11 = Partially Charged
● 12 = Learning
● 13 = Overcharged
Values such as Fully Charged (value = 3) or Partially Charged (value = 11) can be
specified. The value, 10, is not valid in the CIM Schema because in DMI it represents
that no battery is installed. In this case, this object should not be instantiated.
ChargingStatus
This property defines status information about the AC line in the notebook.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Off- Line
Dell Command | Monitor 10.4 classes and properties 107