Reference Guide

Table 26. Fan (continued)
Property Description
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
●
8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
VariableSpeed
Indication of whether the fan supports variable speeds.
DCIM_IndicatorLED
Table 27. IndicatorLED
Property Description
Color
Color This property indicates the current color of the LED. If the value of the
ActivationState property is 4 (Off) this property indicates the color of the LED the
last time it was lit, or has the value 2 (Not Applicable).
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Not Applicable
● 3 = White
● 4 = Red
●
5 = Green
● 6 = Blue
● 7 = Orange
● 8 = Yellow
● 9 = Black
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ControlMode
ControlMode indicates the current control mode for the LED.
Possible values are:
● 2 = Automatic—Indicates the state of the LED is being controlled by the
management infrastructure.
● 3 = Manual—Indicates the state of the LED is being controlled by a management
client.
● 4 = Test—Indicates the LED is in a test mode.
Dell Command | Monitor 10.4 classes and properties 101