Users Guide

{ AttributeName "Trusted Platform Module" AttributeValue “1” AuthorizationToken
“<password>”
3. 重新啟動系統。
4. 若要啟用 TPM，請執行
./omicli iv root/dcim/sysman { DCIM_BIOSService Name DCIM:BiosService
SystemCreationClassName DCIM_ComputerSystem SystemName <system name displayed in
DCIM_BIOSService class> CreationClassName DCIM_BIOSService } SetBIOSAttributes
{ AttributeName " Trusted Platform Module Activation" AttributeValue “2”
AuthorizationToken “<password>” }
5. 重新啟動系統。
6. 若要重設 BIOS 密碼，請執行
./omicli iv root/dcim/sysman { DCIM_BIOSService Name DCIM:BiosService
SystemCreationClassName DCIM_ComputerSystem SystemName <system name displayed in
DCIM_BIOSService class> CreationClassName DCIM_BIOSService } SetBIOSAttributes
{ AttributeName "AdminPwd" AttributeValue “” AuthorizationToken “<password>” }
使用 WinRM 設定 BIOS 屬性
您可以使用 SetBIOSAttributes 方法設定 BIOS 屬性。以下程序針對使用啟用可信賴平台模組 (TPM) 的工作作為範例做解說。
註: 按照下列程序啟用 TPM 之前，請確定 TPM 選項已在 BIOS 中清除。
若要使用 WinRM 命令設定 BIOS 屬性：
1. 列舉 DCIM_BIOSService 類別以取得選擇器集。執行：
winrm e wsman/DCIM_BIOSService?__cimnamespace=root/dcim/sysman -auth:basic -r:https://
<system IP or system name>:<Port Number (5985/5986)> -username:<user name> -
password:<password> -skipCAcheck -skipCNcheck -encoding:utf-8 -returnType:epr
註: 在此範例中將選擇器集的值 (SystemName=<system name from DCIM_BIOSService class>winrm i SetBIOSAttributes
wsman/DCIM_BIOSService?SystemName=dt:
+SystemCreationClassName=DCIM_ComputerSystem+Name=DCIM:BiosService+CreationClassName=DCIM_BIOSService+) 用
來進行設定操作。
2. 設定系統的 BIOS 密碼。若尚未設定，使用下列命令：
winrm i SetBIOSAttributes http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/DCIM_BIOSService?
__cimnamespace=root/dcim/
sysman+Name=DCIM:BiosService+SystemCreationClassName=DCIM_ComputerSystem+SystemName=<system
name from DCIM_BIOSService class>+CreationClassName=DCIM_BIOSService -r:https://<system IP or
system name>:5986 -u:<user name> -password:<password> -auth:basic -skipCAcheck -skipCNcheck -
encoding:utf-8 @{AttributeName="AdminPwd";AttributeValue="<Password>"}
3. 執行下列命令啟用 TPM 安全性：
winrm i SetBIOSAttributes "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/
DCIM_BIOSService?__cimnamespace=root/dcim/
sysman+Name=DCIM:BiosService+SystemCreationClassName=DCIM_ComputerSystem+SystemName=<system
name from DCIM_BIOSService class>+CreationClassName=DCIM_BIOSService -r:https://<system IP or
system name>:5986 -u:<user name> -password:<password> -auth:basic -skipCAcheck -skipCNcheck -
encoding:utf-8 @{AttributeName="Trusted Platform
Module";AttributeValue="1";AuthorizationToken="<Admin password>"}
4. 重新啟動系統。
5. 使用下列命令啟動 TPM：
winrm i SetBIOSAttributes "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/
DCIM_BIOSService?__cimnamespace=root/dcim/
sysman+Name=DCIM:BiosService+SystemCreationClassName=DCIM_ComputerSystem+SystemName=<system
name from DCIM_BIOSService class>+CreationClassName=DCIM_BIOSService -r:https://<system IP or
system name>:5986 -u:<user name> -password:<password> -auth:basic -skipCAcheck -skipCNcheck -
16 使用 Dell Command | Monitor 10.2.1