Reference Guide

Table 28. PowerSupply (continued)
Property Description
● 3 = Disabled—Indicates that the element will not run commands and drops any
new requests.
● 4 = Shutting Down—Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable—Indicates that the element does not support being enabled
or disabled.
● 6 = Enabled but Offline—Indicates that the element may be completing
commands, and drops any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be completing commands, but
queues any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in a restricted mode.
● 10 = Starting—Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
HealthState Indicates the current health of the element. This attribute expresses the health of
this element but not necessarily that of its subcomponents. Possible values are:
● 0 = Unknown—The implementation cannot report on HealthState now.
● 5 = OK—The element is fully functional and is operating within normal
operational parameters and without error.
● 10 = Degraded/Warning—The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For
example, the element may not be operating at optimal performance or it may be
reporting recoverable errors.
● 15 = Minor failure—All functionality is available but some may be degraded.
● 20 = Major failure—The element is failing. It is possible that some or all of the
functionality of this component is degraded or not working.
● 25 = Critical failure—The element is nonfunctional and recovery may not be
possible.
● 30 = Non-recoverable error—The element has completely failed, and recovery is
not possible. All functionality provided by this element has been lost.
● .. = DMTF Reserved
DMTF has reserved the unused portion of the continuum for additional HealthStates
in the future.
RequestedState An integer enumeration that indicates the last requested or desired state for the
element, irrespective of the mechanism through which it was requested. Possible
values are:
● 0 = Unknown—Indicates that the last requested state for the element is
unknown.
● 2 = Enabled—Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
● 3 = Disabled—Requests an immediate disabling of the element, such that it will
not run or accept any commands or processing requests.
● 4 = Shut Down—Requests an orderly transition to the Disabled state, and may
involve removing power, to completely erase any existing state.
● 5 = No Change
● 6 = Offline—Indicates that the element has been requested to transition to the
Enabled but Offline EnabledState.
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
Dell Command | Monitor 10.5 classes and properties 99