Reference Guide

Table 27. IndicatorLED (continued)
Property Description
● 6 = Blue
● 7 = Orange
● 8 = Yellow
● 9 = Black
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ControlMode ControlMode indicates the current control mode for the LED. Possible values are:
● 2 = Automatic—Indicates the state of the LED is being controlled by the
management infrastructure.
● 3 = Manual—Indicates the state of the LED is being controlled by a management
client.
● 4 = Test—Indicates the LED is in a test mode.
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ControlPattern An LED may exhibit a range of behavior from very simple (ex. solid on) to very
complicated (ex. a series of blinks of alternating color and duration). ControlPattern
specifies the vendor or standard behavior exhibited by the LED if it cannot
be described using one of the standard behaviors listed for the ActivationState
property. If ActivationState has the value 5 (ControlPattern), the ControlPattern
property is not NULL. The value of ControlPattern is constructed using the
following preferred algorithm: <OrgID>::<Pattern> Where <OrgID> and < Pattern>
are separated by two colons (::), and where <OrgID> includes a copyrighted,
trademarked, or otherwise unique name that is owned by the business entity that
is creating or defining the ControlPattern or that is a registered ID assigned to
the business entity by a recognized global authority. If the definition of the value
is specified by the DMTF, the value of <OrgID> is DMTF. <Pattern> is chosen by
the business entity and is not reused to identify different underlying (real-world)
behaviors. If the behavior specified for the LED adheres to a standard or proprietary
specification, <Pattern> is a uniquely assigned value identifying the behavior. If
the behavior for the LED is described using a standard or proprietary grammar,
<Pattern> is prefixed with a uniquely assigned identifier for the grammar.
CreationClassName Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
DefaultActivationState Indicates the default state of an LED. See ActivationState for a description of the
values. Possible values are:
● 2 = Lit
● 3 = Blinking
● 4 = Off
● 5 = Control Pattern
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
DeviceID An address or other identifying information used to uniquely name the LogicalDevice.
ElementName Specifies an identifier for the LED. The value of ElementName is constructed
using the following preferred algorithm: <OrgID>::<LocalID> Where <OrgID> and
<LocalID> are separated by two colons (::), and where <OrgID> includes a
copyrighted, trademarked, or otherwise unique name that is owned by the business
entity that is creating or defining the ControlPattern or that is a registered ID
assigned to the business entity by a recognized global authority. <LocalID> is chosen
by the business entity and should not be reused to identify different underlying
(real-world) elements.
EnabledDefault An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element. Possible values are:
● 2 = Enabled
96 Dell Command | Monitor 10.5 classes and properties