Reference Guide

Table 26. Fan (continued)
Property Description
and the return of a result code. If knowledge of the last RequestedState is not
supported for the EnabledLogicalElement, the property is NULL or has the value
12 (Not Applicable). Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change
● 6 = Offline
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
SystemCreationClassName The CreationClassName of the scoping system.
SystemName The System Name of the scoping system.
TransitioningToState Indicates the target state to which the instance is transitioning. Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
●
10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
VariableSpeed Indication of whether the fan supports variable speeds.
DCIM_IndicatorLED
Table 27. IndicatorLED
Property Description
Color Color This property indicates the current color of the LED. If the value of the
ActivationState property is 4 (Off) this property indicates the color of the LED the
last time it was lit, or has the value 2 (Not Applicable). Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Not Applicable
● 3 = White
● 4 = Red
● 5 = Green
Dell Command | Monitor 10.5 classes and properties 95