Reference Guide

Table 24. PCIDevice (continued)
Property Description
loaded, a configuration file is loaded, or some other enabling
activity has occurred. Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Enabled
● 4 = Disabled
● 5 = Not Applicable
SystemCreationClassName The CreationClassName of the scoping system.
SystemName The System Name of the scoping system.
TransitioningToState Indicates the target state to which the instance is
transitioning. Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
DCIM_DisplayController
Table 25. DisplayController
Property Description
CapabilityDescriptions An array of free-form strings providing more detailed explanations for any of the
video Accelerator features indicated in the Capabilities array. Note, each entry of
this array is related to the entry in the Capabilities array that is located at the same
index.
CommunicationStatus CommunicationStatus indicates the ability of the instrumentation to communicate
with the underlying ManagedElement. CommunicationStatus consists of one of the
following values: Unknown, None, Communication OK, Lost Communication, or No
Contact. A Null return indicates the implementation (provider) does not implement
this property. Possible values are:
● 0 = Unknown—Indicates the implementation is in general capable of returning
this property, but is unable to do so at this time.
● 1 = Not Available—Indicates that the implementation (provider) is capable of
returning a value for this property, but not ever for this particular piece of
hardware/software or the property is intentionally not used because it adds no
meaningful information (as in the case of a property that is intended to add
additional info to another property).
● 2 = Communication OK—Indicates communication is established with the
element, but does not convey any quality of service.
● 3 = Lost Communication—Indicates that the Managed Element is known to exist
and has been contacted successfully in the past, but is currently unreachable.
Dell Command | Monitor 10.5 classes and properties 89