Reference Guide

Table 21. SerialPort (continued)
Property Description
of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the
value 12 Not Applicable. Possible values are:
● 0 = Unknown—Indicates that the last requested state for
the element is unknown.
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change
● 6 = Offline—Indicates that the element has been
requested to transition to the Enabled but Offline
EnabledState.
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
● 10 = Reboot—Refers to doing a Shut Down and then
moving to an Enabled state.
● 11 = Reset—Indicates that the element is first Disabled
and then Enabled.
● 12 = Not Applicable
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
Security
An enumeration indicating the operational security for the
Controller. For example, information that the Device's external
interface is locked out (value = 4) or Boot Bypass (value =
6) can be described using this property. Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = None
● 4 = External Interface Locked Out
● 5 = External Interface Enabled
● 6 = Boot Bypass
SerialPortCapabilities The capabilities of this Serial port. Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = XT/AT compatible
● 4 = 16450 compatible
● 5 = 16550 compatible
● 6 = 16550A compatible
● 160 = 8251 compatible
● 161 = 8251FIFO compatible
SystemCreationClassName The creation class name of the scoping system.
SystemName The system name of the scoping system.
TransitioningToState Indicates the target state to which the instance is
transitioning. Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
Dell Command | Monitor 10.5 classes and properties 77