Reference Guide

Table 21. SerialPort (continued)
Property Description
subclassed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and is
not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
EnabledDefault An enumerated value indicating an administrator's default or
startup configuration for the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
●
32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState An integer enumeration that indicates the enabled and
disabled states of an element. It can also indicate the
transitions between these requested states. For example,
shutting down (value = 4) and starting (value = 10) are
transient states between enabled and disabled. Possible
values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled—Indicates that the element is or could be
executing commands, processes any queued commands,
and queues new requests.
● 3 = Disabled—Indicates that the element will not run
commands and drops any new requests.
● 4 = Shutting Down—Indicates that the element is in the
process of going to a Disabled state.
● 5 = Not Applicable—Indicates that the element does not
support being enabled or disabled.
● 6 = Enabled but Offline—Indicates that the element may
be completing commands, and drops any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be
completing commands, but queues any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in
a restricted mode.
● 10 = Starting—Indicates that the element is in the process
of going to an Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that
of its subcomponents. Possible values are:
● 0 = Unknown—The implementation cannot report on
HealthState now. DMTF has reserved the unused portion
of the continuum for additional HealthStates in the future.
● 5 = OK—The element is fully functional and is operating
within normal operational parameters and without error.
Dell Command | Monitor 10.5 classes and properties 73