Reference Guide

Table Of Contents
Table 18. ParallelPort (continued)
Property Description
interface is locked out (valuemap = 3) or Boot Bypass
(valuemap = 5) can be described using this property.
Possible values are:
0 = Unknown
1 = Other
2 = None
3 = External Interface Locked Out
4 = External Interface Enabled
5 = Boot Bypass
.. = DMTF Reserved
32768.. = Vendor Reserved
Speed The bandwidth of the Port in Bits per Second.
SystemCreationClassName The creation class name of the scoping system.
SystemName The system name of the scoping system.
TransitioningToState Indicates the target state to which the instance is
transitioning. Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No ChangeIndicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not ApplicableIndicates the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
DCIM_RemoteServiceAccessPoint
Table 19. RemoteServiceAccessPoint
Property Description
AccessContext The AccessContext property identifies the role this
RemoteServiceAccessPoint is playing in the hosting system.
Possible values are:
0 = Unknown
1 = Other
2 = Default Gateway
3 = DNS Server
4 = SNMP Trap Destination
5 = MPLS Tunnel Destination
6 = DHCP Server
7 = SMTP Server
8 = LDAP Server
9 = Network Time Protocol (NTP) Server
.. = DMTF Reserved
32768..65535 = Vendor Reserved
64 Dell Command | Monitor 10.5 classes and properties