Reference Guide

Table Of Contents
Table 7. DesktopMonitor (continued)
Property Description
SeparateSyncHVSupported Separate Sync H & V Signals are supported.
sRGBStandardDefaultColorSpace If this bit is set to 1, the display uses the sRGB standard
default color space as its primary color space.
StandbyModeSupported This property represents if the video output device can go
into a stand by mode. Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SuspendModeSupported This property represents if the video output device can go
into a suspend mode. Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SystemCreationClassName The creation class name of the scoping system.
SystemName The system name of the scoping system.
TransitioningToState Indicates the target state to which the instance is
transitioning. Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No ChangeIndicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not ApplicableIndicates that the implementation
does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
VeryLowPowerSupported This property represents if the video output device can go
into a low power mode. Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
36 Dell Command | Monitor 10.5 classes and properties