Reference Guide

Table 7. DesktopMonitor (continued)
Property Description
● 2 = Analog Video (R/G/B) #1
● 3 = Analog Video (R/G/B) #2
● 4 = Digital Video (TMDS) #1
● 5 = Digital Video (TMDS) #2
● 6 = Composite Video #1
● 7 = Composite Video #2
● 8 = S-video #1
● 9 = S-video #2
● 1011 = Tuner - Analog #1
● 12 = Tuner - Analog #2
● 13 = Tuner - Digital #1
● 14 = Tuner - Digital #2
● 15 = Component Video #1
● 16 = Component Video #2
● 17 = Component Video #3
● 18 = Digital Video (DisplayPort)
● #1 .. = Digital Video (DisplayPort)
● #2 32768..65535 = DMTF Reserved
InputSourceCapabilities This property lists the allowed values for InputSource.
Possible values are:
● 2 = Analog Video (R/G/B) #1
● 3 = Analog Video (R/G/B) #2
● 4 = Digital Video (TMDS) #1
● 5 = Digital Video (TMDS) #2
● 6 = Composite Video #1
● 7 = Composite Video #2
● 8 = S-video #1
● 9 = S-video #2
● 1011 = Tuner - Analog #1
● 12 = Tuner - Analog #2
● 13 = Tuner - Digital #1
● 14 = Tuner - Digital #2
● 15 = Component Video #1
● 16 = Component Video #2
● 17 = Component Video #3
● 18 = Digital Video (DisplayPort)
● #1 .. = Digital Video (DisplayPort)
● #2 32768..65535 = DMTF Reserved
MaxBrightness This property defines the maximum value of brightness of
the video output device. Different manufacturers may have
different values.
MaxContrast This property represents the maximum value of contrast of
the video output device. Different manufacturers may have
different values.
MaxQuiesceTime The use of this property has been deprecated. When
evaluating the use of Quiesce, it was determined that this
single property is not adequate for describing when a device
will automatically exit a quiescent state. In fact, the most
likely scenario for a device to exit a quiescent state was
determined to be based on the number of outstanding
requests queued rather than on a maximum time. This
decision is reevaluated and later. Deprecated description:
Maximum time, in milliseconds, that a Device can run in a
32 Dell Command | Monitor 10.5 classes and properties