Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.5 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Serial Port 4 Configures the 4th serial port of the system.
Possible values are:
DisabledDisables the 4th serial port.
AutoEnables the auto-configuration of the 4th serial
port.
RS232
RS422
RS485
Windows, Linux
Serial Port 5 Configures the systems 5th serial port.
Possible values are:
DisabledDisables the 5th serial port.
AutoEnables the auto-configuration of the 5th serial
port.
Windows, Linux
Serial Port 6 Configures the 6th serial port of the system.
Possible values are:
DisabledDisables the 6th serial port.
AutoEnables the auto-configuration of the 6th serial
port.
Windows, Linux
SERR DMI Message Enables or Disables SERR DMI Messages.
Possible values are:
Off
On
Windows, Linux
Service OS Clear Deletes the service OS non-volatile region.
Possible values are:
EnabledDeletes the service OS non-volatile region
and changes the BIOS setting status to Disabled.
DisabledDoes not delete the service OS non-volatile
region.
Windows, Linux
Set CMOS To Default Request or do not request a default of CMOS values on the
next boot.
Possible values are:
Disabled
Enabled
Windows
SFP Enables or Disables Small Formfactor Pluggable (SFP)
device.
Possible values are:
DisabledDisables the SFP device.
EnabledEnables the SFP device.
Enabled With PXEEnables the SFP device with PXE
support.
NOTE: SFP device is listed as boot device only if this
BIOS setting is Enabled with PXE.
Windows, Linux
SFP Wake on LAN Possible values:
SFPAllows the system to wake-up by special SFP
signals.
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.5 293