Reference Guide

Table 7. DesktopMonitor (continued)
Property Description
ColorModePresetCapabilities This property lists the allowed values for ColorModePreset.
Possible values are:
● 0 = Unknown
● 2 = sRGB
● 3 = Display Native
● 4 = 4000K
● 5 = 5000K
● 6 = 6500K
● 7 = 7500K
● 8 = 8200K
● 9 = 9300K
● 1011 = 10000K
● 12 = 11500K
● 13 = User 1
● 14 = User
● .. = User 3
● 32768..65535 = DMTF Reserved
CommunicationStatus Indicates the ability of the instrumentation to communicate
with the underlying ManagedElement. A Null return indicates
the implementation (provider) does not implement this
property. Possible values are:
● 0 = Unknown—Indicates that the implementation is in
general capable of returning this property, but is unable
to do so now.
● 1 = Not Available—Indicates that the implementation
(provider) is capable of returning a value for this property,
but not ever for this particular piece of hardware/software
or the property is intentionally not used because it adds no
meaningful information (as in the case of a property that is
intended to add additional info to another property).
● 2 = Communication OK—indicates that communication is
established with the element, but does not convey any
quality of service.
● 3 = Lost Communication—Indicates that the Managed
Element is known to exist and has been contacted
successfully in the past, but is unreachable.
● 4 = No Contact—Indicates that the monitoring system has
knowledge of this element, but has never been able to
establish communications with it.
●
.. = DMTF Reserved
● 0x8000.. = Vendor Reserved
CompositSyncSignalOnGreenVideoSupported
Composite Sync Signal on Green video is supported.
CompositSyncSignalOnHorizontalSupported Composite Sync Signal on Horizontal is supported.
ContinuousFrequency For EDID 1.3, this bit indicated support for or no support
for GTF(using the default GTF parameter values). For EDID
1.4 this bit has been redefined to indicate Continuous
frequency(1) or Non-Continuous Frequency(0).
Contrast This property represents the contrast of the video output.
The property value is from 0 to the MaxContrast property
value. If the Contrast property is implemented but the
contrast is unknown at the time, the property has a value
0x80000000.
CreationClassName Indicates the name of the class or the subclass used in
the creation of an instance. When used with the other key
28 Dell Command | Monitor 10.5 classes and properties