Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.5 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● Enabled
IDE Defines whether the IDE controller is Enabled or Disabled.
Possible values are:
● Disabled
● Auto
Windows
Intel Rapid Start Timer Configures the timeout value (in minutes) for Intel Rapid
Start Technology (IRST) mode. After the set timeout, the
system enters IRST mode from the S3 system sleep mode.
The acceptable values are in the range 0-999.
Possible values are:
● integers ranging from 0 to 999
Windows
Keyboard Backlight Active Color Displays or sets an active color for the keyboard backlight
for the rugged systems.
Possible values are:
● 0—White
● 1—Red
● 2—Green
● 3—Blue
● 4—Customcolor1
● 5—Customcolor2
Windows, Linux
Keyboard Backlight Custom Color 1 Displays and configures the custom color 1 by specifying
the Red, Green and Blue (RGB) values. The color can be
selected using RGB components by mentioning it in ‘R,G,B’
format. Each color component value ranges from 0 to 255.
Possible value is:
● 0—255, 0—255, 0—255—Red, Green, Blue
Windows, Linux
Keyboard Backlight Custom Color 2 Displays and configures the custom color 2 by specifying
the Red, Green and Blue (RGB) values. The color can be
selected using RGB components by mentioning it in ‘R,G,B’
format. Each color component value ranges from 0 to 255.
Possible value is:
● 0—255, 0—255, 0—255—Red, Green, Blue
Windows, Linux
Keyboard Backlight Color Enabled Displays or Enables the supported colors on the keyboard
backlight for the rugged systems. Press Fn+C to switch
among the Enabled colors.
Possible values are:
● 0—None
● 1—White
● 2—Red
● 3—Green
● 4—Blue
● 5—Customcolor1
● 6—Customcolor2
NOTE:
● You can Enabled multiple colors at a time.
● If ‘0—None’ is selected, keyboard backlight color
switching by pressing Fn+C will not be possible. The
Windows
268 BIOS settings supported in Dell Command | Monitor 10.5