Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.5 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● Disabled
Enclave Memory Size Displays the Intel(R) Software Guard Extensions(TM)
(SGX) Enclave Processor Reserved Memory Size.
Possible values are:
● 32MB
● 64MB
● 128MB
● 256MB
NOTE: Enclave Memory Size option can be set from
the BIOS setup screen only.
Windows, Linux
Enable UEFI Network Stack This option is disabled by default. If enabled, UEFI
Networking protocols are installed/available, allowing pre-
OS and early OS networking features to use the enabled
NICs. This option may be used without turning on PXE.
Possible values are:
● Enabled—Enables speed boot time, limits network
security, and network access capability. Select the
UefiNwStack option to run diagnostics and recovery of
the system.
● SelectiveEnable—The speed of the boot time reduces,
limits network security, and increases network access
capability. Select the UefiNwStack option for BitLocker
to work on boot.
● AutoEnable—This option is not displayed when the
UefiNwStack is enabled by platform customization.
Enables speed boot time, limits network security, and
increases network access capability.
● Disabled—Disables speed boot time, network security,
and restricts network access capability.
Windows, Linux
Energy Star Logo Displays or hides the Energy Star logo during post.
Possible values are:
● Disabled
● Enabled
Windows, Linux
e-SATA Ports Enabled/Disabled e-SATA Ports
Possible values are:
● Disabled
● Enabled
Windows, Linux
Express Card This setting will Enabled the express card port, which
allows the user to insert an express card into the slot and it
will be configured.
Possible values are:
● Disabled
● Enabled
Windows, Linux
Express Charge Define the express charging.
Possible values are:
● Disabled
● Enabled
Windows
BIOS settings supported in Dell Command | Monitor 10.5 259