Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.5 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Enabled
Camera Vision Sensing
Setting this attribute enables SafeShutter to manual mode
and it disables the setup option.
Possible values are:
Disabled
Enabled
Windows, Linux
CAN Bus Enables or Disables the Controller Area Network (CAN)
Bus.
Possible values are:
Disabled
Enabled
Windows, Linux
Cellular Radio Enables or Disables the cellular radio, that is, the WWAN
module.
Possible values are:
Disabled
Enabled
Windows, Linux
Charger Defines the charger details.
Possible values are:
Disabled
Enabled
Windows
Chassis Intrusion Enables the system to detect and report the Chassis
Intrusion events to the system display on boot-up.
Possible values are:
Disabled
Enabled
Silent
Windows, Linux
Chassis Intrusion Status This property shows the status of the system with regards
to Chassis Intrusion (Detected or Not Detected). A value
of Unknown indicates one of two things: either Chassis
Intrusion is not supported by this system, or Chassis
Intrusion event reporting has been Disabled by the user. If
the value is Detected, the user may set it to Not Detected
to Enabled the system to receive the next event and to
stop generating events for now.
Possible values are:
Tripped
Door open
Door closed
Trip reset
Windows, Linux
Clear BIOS Log Prevents or allows the BIOS event log to be cleared on the
next boot.
Possible values are:
DisabledDoes not clear the BIOS event log on the
next boot.
EnabledClears the BIOS event log on the next boot.
Windows, Linux
252 BIOS settings supported in Dell Command | Monitor 10.5