Reference Guide

Table Of Contents
Table 5. Chassis (continued)
Property Description
ElementName A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is
also defined as a user-friendly name. But, it is often sub-
classed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and is
not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
LockPresent Boolean indicating whether the Frame is protected with a
lock.
Manufacturer The name of the organization responsible for producing the
PhysicalElement. This organization may be the entity from
whom the Element is purchased, but this is not necessarily
true. The latter information is contained in the Vendor
property of CIM_Product.
Model The name by which the PhysicalElement is generally known.
Name The Name property defines the label by which the object
is known. When sub-classed, the Name property can be
overridden to be a Key property.
PackageType Enumeration defining the type of the PhysicalPackage.
Possible values are:
0 = UnknownIndicates that the package type is not
known.
1 = OtherThe package type does not correspond to an
existing enumerated value. The value is specified using the
OtherPackageType property.
2 = Rack
3 = Chassis/Frame
4 = Cross Connect/Backplane
5 = Container/Frame Slot
6 = Power Supply
7 = Fan
8 = Sensor
9 = Module/Card
10 = Port/Connector
11 = Battery
12 = Processor
13 = Memory
14 = Power Source/Generator
15 = Storage Media Package (example, Disk or Tape Drive)
16 = Blade
17 = Blade Expansion
NOTE:
This enumeration expands on the list in the Entity
MIB (the attribute, entPhysicalClass). The numeric values
are consistent with CIM's enum numbering guidelines, but
are slightly different than the MIB's values. The values
Rack through Port/Connector are defined per the
Entity-MIB (where the semantics of rack are equivalent
to the MIB's stack value). The other values (for battery,
processor, memory, power source/generator and storage
24 Dell Command | Monitor 10.5 classes and properties