Reference Guide

Table 125. AssociatedCacheMemory (continued)
Property Description
ReadPolicy Policy that is employed by the Cache for handling read requests. For example, Read,
Read-Ahead or both can be specified using the values, 2, 3 or 4, respectively. If
the read policy is determined individually (ie, for each request), then the value 5
(Determination per I/O) should be specified. Other (1) and Unknown (0) are
also valid values.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Read
● 3 = Read-Ahead
● 4 = Read and Read-Ahead
● 5 = Determination Per I/O
WritePolicy Defines whether this is write-back (value = 2) or write-through (value = 3) Cache,
or whether this information Varies with Address (4) or is defined individually for
each I/O (5). Also, Other and Unknown (0) can be specified. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Read
● 3 = Read-Ahead
● 4 = Read and Read-Ahead
● 5 = Determination Per I/O
DCIM_AssociatedSensor
Table 126. AssociatedSensor
Property Description
Antecedent The Sensor.
Dependent The ManagedSystemElement for which information is measured by the Sensor.
DCIM_RemoteAccessAvailableToElement
Table 127. RemoteAccessAvailableToElement
Property Description
Antecedent The remote server or system.
Dependent The EnabledLogicalElement which has knowledge of the remote server or system.
IsDefault Indicates that this access information is defined as a default configuration for the
system.
OrderOfAccess When an element is accessing remote services and systems, it MAY be necessary to
order those accesses. This property defines that ordering — where lower numbers
indicate a higher priority for access. A value of 0 (default) indicates that ordering
does not apply. If multiple RemoteAccessPoint instances have the same value for
OrderOfAccess, then these AccessPoints MAY be used in any sequence defined by
the implementation.
Dell Command | Monitor 10.5 classes and properties 229