Reference Guide

Table 88. RedundancySet (continued)
Property Description
● 2 = Fully Redundant—Indicates that all of the configured redundancy is still
available
● 3 = Degraded Redundancy—Indicates that some configured elements are
degraded, missing or failed but that the number of elements in the set is still
greater than the minimum required (MinNumberNeeded);
● 4 = Redundancy Lost—Indicates that sufficient configured elements are missing
or failed that no redundancy is available and the next failure experienced will
cause overall failure.
● 5 = Overall Failure—Indicates that there has been an overall failure of the
RedundancySet.
TypeOfSet TypeOfSet provides information on the type of redundancy. - N+1 (=2) indicates
all members are active, are unaware and function independent of one another.
However, there exist at least one extra member to achieve functionality. Sparing
is implied (i.e. each member can be a spare for the other(s). An example of N+1 is
a system that has 2 power supplies, but needs only 1 power supply to functioning
properly. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = N+1
● 3 = Load Balanced—Indicates all members are active. However, there
functionality is not independent of each other. Their functioning is determined
by some sort of load balancing algorithm (implemented in hardware and/or
software). Sparing is implied (i.e. each member can be a spare for the other(s).
● 4 = Sparing—Indicates that all members are active and are aware of each others.
However, their functionality is independent until failover. Each member can be a
spare for the other(s).
● 5 = Limited Sparing—Indicates that all members are active, and they may or
may not be aware of each and they are not spares for each other. Instead, their
redundancy is indicated by the IsSpare relationship.
● .. = DMTF Reserved
● 0x8000.. = Vendor Reserved
DCIM_Role
Table 89. Role
Property Description
CommonName A Common Name is a (possibly ambiguous) name by which the role is commonly
known in some limited scope (such as an organization) and conforms to the naming
conventions of the country or culture with which it is associated.
CreationClassName Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
ElementName A user-friendly name for the object. This property allows each instance to define
a user-friendly name in addition to its key properties, identity data, and description
information.
NOTE: The Name property of ManagedSystemElement is also defined as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that
the same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances
of LogicalDevice), the same information can be present in both the Name and
ElementName properties.
214 Dell Command | Monitor 10.5 classes and properties