Reference Guide

Table 84. AllocationCapabilities (continued)
Property Description
● 16 = DVD drive
● 17 = Disk Drive
● 18 = Tape Drive
● 19 = Storage Extent
● 20 = Other Storage Device
● 21 = Serial port
● 22 = Parallel port
● 23 = USB Controller
● 24 = Graphics controller
● 25 = IEEE 1394 Controller
● 26 = Partitionable Unit
● 27 = Base Partitionable Unit
● 28 = Power
● 29 = Cooling Capacity
● 30 = Ethernet Switch Port
● 31 = Logical Disk
● 32 = Storage Volume
● 33 = Ethernet Connection
● .. = DMTF reserved
● 0x8000..0xFFFF = Vendor Reserved
SharingMode Indicates how access to underlying resource is granted. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Dedicated—Exclusive access to underlying resource
● 3 = Shared—Shared use of underlying resource.
● .. = DMTF reserved
● 0x8000..0xFFFF = Vendor Reserved
Actual quantity is controlled by min, max size, weights, and so on.
DCIM_BIOSServiceCapabilities
Table 85. BIOSServiceCapabilities
Property Description
InstanceID Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. In order to ensure uniqueness within the
NameSpace, the value of InstanceID SHOULD be constructed using the following
preferred algorithm: <OrgID> : <LocalID> Where <OrgID>and <LocalID> are
separated by a colon ':', and where <OrgID> MUST include a copyrighted,
trademarked or otherwise unique name that is owned by the business entity
creating/defining the InstanceID, or is a registered ID that is assigned to the
business entity by a recognized global authority (This is similar to the <Schema
Name>_<Class Name> structure of Schema class names.) In addition, to ensure
uniqueness <OrgID> MUST NOT contain a colon (':'). When using this algorithm, the
first colon to appear in InstanceID MUST appear between <OrgID>and <LocalID>.
<LocalID> is chosen by the business entity and SHOULD not be re-used to identify
different underlying (real-world) elements. If the above preferred algorithm is not
used, the defining entity MUST assure that the resultant InstanceID is not re-used
across any InstanceIDs produced by this or other providers for this instance's
NameSpace. For DMTF defined instances, the preferred algorithm MUST be used
with the <OrgID> set to 'CIM'.
MethodsSupported This property advertises the methods that are supported by the service .Possible
values are:
210 Dell Command | Monitor 10.5 classes and properties