Reference Guide

Table 67. AlertIndicationSettingData (continued)
Property Description
IndicationIdentifier An identifier for the Alert indication. This property is similar to a key value in
that it can be used for identification, when correlating Alert indications (see the
Correlated indications array). Its value should be unique as long as Alert correlations
are reported, but may be reused or left NULL if no future Alert indications will
reference it in their Correlated indications array.
InstanceID Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. To ensure uniqueness within the NameSpace, the
value of InstanceID should be constructed using the following preferred algorithm:
<OrgID> : <LocalID>
Where <OrgID> and <LocalID> are separated by a colon (:), and where <OrgID>
must include a copyrighted, trademarked, or otherwise unique name that is owned
by the business entity that is creating or defining the InstanceID or that is a
registered ID assigned to the business entity by a recognized global authority. (This
requirement is similar to the <Schema Name>_<Class Name> structure of Schema
class names.) In addition, to ensure uniqueness, <OrgID> must not contain a colon
(:). When using this algorithm, the first colon to appear in InstanceID must appear
between <OrgID> and <LocalID> . <LocalID> is chosen by the business entity and
should not be reused to identify different underlying (real-world) elements. If the
above preferred algorithm is not used, the defining entity must assure that the
resulting InstanceID is not reused across any InstanceIDs produced by this or other
providers for the NameSpace of this instance. For DMTF-defined instances, the
preferred algorithm must be used with the <OrgID> set to CIM.LocalOnly.
LocalOnly This property shows if the events from this the event source should be reported to
the local indication consumer only or should be reported to CIMOM as an indication.
TRUE for reporting to local consumer only, and FALSE for reporting as an indication.
MaxDisplayNotifications The maximum number of indications of this type that will be sent to the local display.
MaxNTEventLogNotifications The maximum number of indications of this type that will be sent to the local display.
Name The label by which the Configuration object is known.
OtherAlertType A string describing the Alert type - used when the Alert type property is set to 1,
Other State Change.
PollEnabled This property shows if status-polling of the event source is enabled or not. TRUE for
enable, and FALSE for disabled.
PollingInterval The polling interval for event source, in seconds.
ProbableCause An enumerated value that describes the probable cause of the situation which
resulted in the AlertIndication. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Adapter/Card Error
● 3 = Application Subsystem Failure
● 4 = Bandwidth Reduced
● 5 = Connection Establishment Error
● 6 = Communications Protocol Error
● 7 = Communications Subsystem Failure
● 8 = Configuration/Customization Error
● 9 = Congestion
● 10 = Corrupt Data
● 11 = CPU Cycles Limit Exceeded
● 12 = Dataset/Modem Error
● 13 = Degraded Signal
● 14 = DTE-DCE Interface Error
● 15 = Enclosure Door Open
Dell Command | Monitor 10.5 classes and properties 193