Reference Guide

Table 56. PowerAllocationSettingData (continued)
Property Description
all components that could be added to the ManagedSystemElement without
requiring a power cycle of the ManagedSystemElement were added to the
ManagedSystemElement.
● 6 = MaxIfAllColdPlug—Indicates that the instance provides information about
the maximum power allocated or consumed by the ManagedSystemElement if all
components that could be added to the ManagedSystemElement, including those
that require a power cycle of the ManagedSystemElement, were added to the
ManagedSystemElement.
● 7 = Allocated—Indicates that the instance provides information about the
current power allocated to the ManagedSystemElement.
● 8 = MinWithoutDegradation—Indicates that the instance provides information
about the minimum power allocated or consumed by the ManagedSystemElement
without causing performance degradation.
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ResourceType The type of resource this allocation setting represents. Possible values are:
● 1 = Other
● 2 = Computer System
● 3 = Processor
● 4 = Memory
● 5 = IDE Controller
● 6 = Parallel SCSI HBA
● 7 = FC HBA
● 8 = iSCSI HBA
● 9 = IB HCA
●
10 = Ethernet Adapter
● 11 = Other Network Adapter
● 12 = I/O Slot
● 13 = I/O Device
● 14 = Floppy Drive
● 15 = CD Drive
● 16 = DVD drive
● 17 = Disk Drive
● 18 = Tape Drive
● 19 = Storage Extent
● 20 = Other storage device
● 21 = Serial port
● 22 = Parallel port
● 23 = USB Controller
● 24 = Graphics controller
● 25 = IEEE 1394 Controller
● 26 = Partitionable Unit
● 27 = Base Partitionable Unit
● 28 = Power
● 29 = Cooling Capacity
● 30 = Ethernet Switch Port
● 31 = Logical Disk
● 32 = Storage Volume
● 33 = Ethernet Connection
● .. = DMTF reserved
● 0x8000..0xFFFF = Vendor Reserved
Dell Command | Monitor 10.5 classes and properties
183