Reference Guide

Table 47. ComputerSystem (continued)
Property Description
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled—Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
● 3 = Disabled—Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down—Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable—Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline—Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be completing commands, but will
queue any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in a restricted mode.
● 10 = Starting—Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
HealthState Indicates the current health of the element. This attribute expresses the health of
this element but not necessarily that of its subcomponents.
DMTF has reserved the unused portion of the continuum for additional HealthStates
in the future.
Possible values are:
● 0 = Unknown—The implementation cannot report on HealthState at this time.
● 5 = OK—The element is fully functional and is operating within normal
operational parameters and without error.
● 10 = Degraded/Warning—The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For
example, the element may not be operating at optimal performance or it may be
reporting recoverable errors.
● 15 = Minor failure—All functionality is available but some may be degraded.
● 20 = Major failure—The element is failing. It is possible that some or all of the
functionality of this component is degraded or not working.
● 25 = Critical failure—The element is non-functional and recovery may not be
possible.
● 30 = Non-recoverable error—The element has completely failed, and recovery is
not possible. All functionality provided by this element has been lost.
● .. = DMTF Reserved
IdentifyingDescriptions An array of free-form strings providing explanations and details behind the entries in
the OtherIdentifying Info array. Note, each entry of this array is related to the entry
in OtherIdentifyingInfo that is located at the same index.
Name The inherited Name serves as the key of a system instance in an enterprise
environment.
OperationalStatus Indicates the current statuses of the element. Various operational statuses are
defined. Many of the enumeration's values are self-explanatory.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = OK
Dell Command | Monitor 10.5 classes and properties 163