Reference Guide

Table 46. SoftwareInstallationService (continued)
Property Description
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_ComputerSystem
Table 47. ComputerSystem
Property Description
CreationClassName Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
Dedicated Enumeration indicating the purpose(s) for which the ComputerSystem is dedicated,
if any, and the functionality provided. For example, one could specify that the
System is dedicated to Print (value = 11) or acts as a Hub (value = 8).
Also, a value = 0 indicates this is a general purpose system, Not Dedicated but that
it also hosts Print (value = 11) or mobile phone Mobile User Device (value = 17)
services.
A clarification is needed with respect to the value 17 (Mobile User Device). An
example of a dedicated user device is a mobile phone or a barcode scanner in
a store that communicates via radio frequency. These systems are quite limited
in functionality and programmability, and are not considered general purpose
computing platforms. Alternately, an example of a mobile system that is general
purpose (that is, is NOT dedicated) is a hand-held computer. Although limited in its
programmability, new software can be downloaded and its functionality expanded by
the user.
The management scope of a Management Controller is typically a single managed
system in which it is contained.
Possible values are:
● 0 = Not Dedicated
● 1 = Unknown
● 2 = Other
● 3 = Storage
● 4 = Router
● 5 = Switch
● 6 = Layer 3 Switch
● 7 = Central Office Switch
● 8 = Hub
● 9 = Access Server
● 10 = Firewall
● 11 = Print
● 12 = I/O
● 13 = Web Caching
● 14 = Management—Indicates this instance is dedicated to hosting system
management software.
● 15 = Block Server
● 16 = File Server
● 17 = Mobile User Device
● 18 = Repeater
Dell Command | Monitor 10.5 classes and properties
161