Reference Guide

Table 44. PowerUtilizationManagementService (continued)
Property Description
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
EnabledState An integer enumeration that indicates the enabled and disabled states of an element.
It can also indicate the transitions between these requested states. For example,
shutting down (value = 4) and starting (value = 10) are transient states between
enabled and disabled.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled—Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
● 3 = Disabled—Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down—Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable—Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline—Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be completing commands, but will
queue any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in a restricted mode.
● 10 = Starting
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides an indication of the
functionality that is managed. This functionality is described in more detail in the
Description property of the object.
PendingPowerUtilizationAlgorithm This property describes the pending requested algorithm to be employed by the
service for power utilization.
Possible values are:
● 0 = Unknown
● 2 = None—Indicates that currently the service is not employing any
power utilization algorithm. If the property value is 2 (None), then the
PowerUtilizationMode is equal to 2 (None).
● 3 = Custom Settings Based—Indicates that the service is employing power
utilization algorithm based on a specific settings. This settings may be
represented by the DCIM_PowerUtilizationSettingData instance associated
● 4 = Maximum Performance—Indicates that the service is employing a power
utilization that yields the maximum performance for the affected managed
elements. If the property value is 4 (Maximum Performance), then the
PowerUtilizationMode is equal to 4 (Static).
● 5 = Minimum Performance—Indicates that the service is employing a power
utilization that yields the minimum power consumption for the affected managed
elements. If the property value is 5 (Minimum Performance), then the
PowerUtilizationMode is equal to 4 (Static).
Dell Command | Monitor 10.5 classes and properties 153