Reference Guide

Table 43. IPConfigurationService (continued)
Property Description
● 3 = Disabled—Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down—Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable—Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline—Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be completing commands, but will
queue any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in a restricted mode.
● 10 = Starting—Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
Name The Name property uniquely identifies the Service and provides an indication of the
functionality that is managed. This functionality is described in more detail in the
Description property of the object.
SystemCreationClassName The CreationClassName of the scoping System.
SystemName The Name of the scoping System.
TransitioningToState Indicates the target state to which the instance is transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change—Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
●
8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable—Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_PowerUtilizationManagementService
Table 44. PowerUtilizationManagementService
Property Description
CreationClassName Indicates the name of the class or the subclass that is used in the creation of an
instance. When used with the other key properties of this class, this property allows
all instances of this class and its subclasses to be uniquely identified.
EnabledDefault An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element. By default, the element is Enabled (value =
2).
Possible values are:
152 Dell Command | Monitor 10.5 classes and properties