Reference Guide

Table 30. Processor (continued)
Property Description
● 261 = SH-4
● 280 = ARM
● 281 = StrongARM
● 300 = 6x86
● 301 = MediaGX
● 302 = MII
● 320 = WinChip
● 350 = DSP
● 500 = Video Processor
● 65534 = Reserved (For Future Special Purpose Assignment)
● 65535 = Reserved (Un-initialized Flash Content - Hi)
For example, values include Pentium(R) processor with MMX(TM) technology
(value = 14) and 68040 (value = 96).
HealthState Indicates the current health of the element. This attribute expresses the health of
this element but not necessarily that of its subcomponents. DMTF has reserved the
unused portion of the continuum for additional HealthStates in the future. Possible
values are:
● 0 = Unknown—The implementation cannot report on HealthState at this time.
● 5 = OK—The element is fully functional and is operating within normal
operational parameters and without error.
● 10 = Degraded/Warning—The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For
example, the element may not be operating at optimal performance or it may be
reporting recoverable errors.
● 15 = Minor failure—All functionality is available but some may be degraded.
● 20 = Major failure—The element is failing. It is possible that some or all of the
functionality of this component is degraded or not working.
● 25 = Critical failure—The element is non-functional and recovery may not be
possible.
● 30 = Non-recoverable error—The element has completely failed, and recovery is
not possible. All functionality provided by this element has been lost.
● .. = DMTF Reserved
MaxClockSpeed The maximum speed (in MHz) of this Processor.
NumberOfEnabledCores Number of processor cores enabled for processor.
OperationalStatus Indicates the current statuses of the element. Various operational statuses are
defined. Many of the enumeration's values are self-explanatory. However, a few are
not and are described here in more detail. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = OK
● 3 = Degraded
● 4 = Stressed—Indicates that the element is functioning, but needs attention.
Examples of Stressed states are overload, overheated, and so on.
● 5 = Predictive Failure—Indicates that an element is functioning nominally but
predicting a failure in the near future.
● 6 = Error
● 7 = Non-Recoverable Error
● 8 = Starting
● 9 = Stopping
● 10 = Stopped—Implies a clean and orderly stop.
● 11 = In Service—Describes an element being configured, maintained, cleaned, or
otherwise administered.
● 12 = No Contact—Indicates that the monitoring system has knowledge of this
element, but has never been able to establish communications with it.
Dell Command | Monitor 10.5 classes and properties 111