Reference Guide

Table 28. PowerSupply (continued)
Property Description
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_Battery
Table 29. Battery
Property Description
BatteryStatus Description of the charge status of the Battery. Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Fully Charged
● 4 = Low
● 5 = Critical
● 6 = Charging
● 7 = Charging and High
● 8 = Charging and Low
● 9 = Charging and Critical
●
10 = Undefined
● 11 = Partially Charged
● 12 = Learning
● 13 = Overcharged
Values such as Fully Charged (value = 3) or Partially Charged (value = 11) can be
specified. The value, 10, is not valid in the CIM Schema because in DMI it represents
that no battery is installed. In this case, this object should not be instantiated.
ChargingStatus This property defines status information about the AC line in the notebook. Possible
values are:
● 1 = Other
● 2 = Unknown
● 3 = Off- Line
● 4 = On-Line
● 5 = On Backup Power
Chemistry An enumeration that describes the chemistry of the Battery.
● 1 = Other
● 2 = Unknown
● 3 = Lead Acid
● 4 = Nickel Cadmium
● 5 = Nickel Metal Hydride
● 6 = Lithium-ion
● 7 = Zinc air
● 8 = Lithium Polymer
CreationClassName Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
DesignCapacity The design capacity of the battery in m Watt-hours. If this property is not supported,
enter 0.
DesignVoltage The design voltage of the battery in mVolts. If this attribute is not supported, enter
0.
DeviceID An address or other identifying information used to uniquely name the LogicalDevice.
Dell Command | Monitor 10.5 classes and properties 101