Reference Guide

Table 23. Memory (continued)
Property Description
Possible values are:
● 0 = Unknown — Indicates the last requested state for the
element is unknown.
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change
● 6 = Offline — Indicates that the element has been
requested to transition to the Enabled but Offline
EnabledState.
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
● 10 = Reboot — Refers to doing a Shut Down and then
moving to an Enabled state.
● 11 = Reset - Indicates that the element is first Disabled
and then Enabled.
● 12 = Not Applicable
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in
progress.
●
6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
Volatile
Volatile is a property that indicates whether this memory is
volatile or not.
Dell Command | Monitor 10.2.1 classes and properties 91