Reference Guide

Table 21. SerialPort (continued)
Property Description
● 0 = Unknown — The implementation cannot report on
HealthState now. DMTF has reserved the unused portion
of the continuum for additional HealthStates in the future.
● 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
● 10 = Degraded/Warning — The element is in working
order and all functionality is provided. However, the
element is not working to the best of its abilities. For
example, the element may not be operating at optimal
performance or it may be reporting recoverable errors.
● 15 = Minor failure — All functionality is available but some
may be degraded.
● 20 = Major failure — The element is failing. It is possible
that some or all of the functionality of this component is
degraded or not working.
● 25 = Critical failure — The element is nonfunctional and
recovery may not be possible.
● 30 = Non-recoverable error
● .. = DMTF Reserved — The element has failed, and
recovery is not possible. All functionality provided by this
element has been lost.
IRQLevel
An integer value that represents the IRQ level used by the
serial port.
MaxSpeed
The maximum bandwidth of the Port in Bits per Second.
OperationalStatus
Indicates the current statuses of the element. Various
operational statuses are defined. Many of the enumeration's
values are self-explanatory. However, a few are not and are
described here in more detail.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = OK
● 3 = Degraded
● 4 = Stressed — Indicates that the element is functioning,
but needs attention. Examples of Stressed states are
overload, overheated, and so on.
● 5 = Predictive Failure — Indicates that an element is
functioning nominally but predicting a failure soon.
● 6 = Error
● 7 = Non-Recoverable Error
● 8 = Starting
● 9 = Stopping
● 10 = Stopped — Implies a clean and orderly stop.
● 11 = In Service — Describes an element being configured,
maintained, cleaned, or otherwise administered.
● 12 = No Contact — Indicates that the monitoring system
has knowledge of this element, but has never been able to
establish communications with it.
● 13 = Lost Communication — Indicates that the
ManagedSystem Element is known to exist and has been
contacted successfully in the past, but is unreachable.
● 14 = Aborted — Implies an abrupt stop where the state
and configuration of the element may need to be updated.
78
Dell Command | Monitor 10.2.1 classes and properties