Reference Guide

Table 19. RemoteServiceAccessPoint (continued)
Property Description
● 5 = No Change
● 6 = Offline — Indicates that the element has been
requested to transition to the Enabled but Offline
EnabledState.
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
● 10 = Reboot — Refers to doing a Shut Down and then
moving to an Enabled state.
● 11 = Reset — Indicates that the element is first Disabled
and then Enabled.
● 12 = Not Applicable
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is
transitioning. A value other than 5 or 12 identifies the state to
which the element is in the process of transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in-
progress.
● 6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates the implementation does
not support representing ongoing transitions
DCIM_Slot
Table 20. Slot
Property Description
ConnectorLayout
Describes the type of packaging normally associated with this
type of connector.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = RS232
● 3 = BNC
● 4 = RJ11
● 5 = RJ45
● 6 = DB9
Dell Command | Monitor 10.2.1 classes and properties 71