Reference Guide

Table 18. ParallelPort (continued)
Property Description
the last RequestedState is not supported for the
EnabledLogicalElement, the pro
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change
● 6 = Offline
● 7 = Test
● 8 = Deferred
● 9 = Quiesce
● 10 = Reboot — Refers to doing a Shut Down and then
moving to an Enabled state.
● 11 = Reset — Indicates that the element is first Disabled
and then Enabled.
● 12 = Not Applicable
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
Security
An enumeration indicating the operational security for the
Controller. For example, information that the Device's external
interface is locked out (valuemap = 3) or Boot Bypass
(valuemap = 5) can be described using this property.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = None
● 3 = External Interface Locked Out
● 4 = External Interface Enabled
● 5 = Boot Bypass
● .. = DMTF Reserved
● 32768.. = Vendor Reserved
Speed
The bandwidth of the Port in Bits per Second.
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in
progress.
●
6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
Dell Command | Monitor 10.2.1 classes and properties 67